Upgrade your custom worktop or workbench with versatile 1/4-20 mounting hardware and decorative protective bumpers!
These Bumpers are for ~1.5 inch thick material- 2 ¾ inch edge glued boards or 2- ¾ inch pieces of plywood.
The Dimensions of these Corner Brackets are optimal for a 24inchx16inch Worktops. The space between each corner bracket is wide enough for 1 Handler System Wall Mount on each side or 2 Wall mounts on the front or Back.
If you will be attaching these to a smaller worktop they will still fit! But Handler Wall Mounts may not fit between the corner brackets.
Installation:
Cut 1 inch 45 degree chamfers on edge of material
Mark Holes. Pre drill, and install corner bracket with 1 screw per side
The 1/4-20 Threaded inserts are compatible with a growing line of WD accessories- starting with the Corner Anchor Point
Or attach your own accessory with 1-4/20 Hardware
Upgrade your custom worktop or workbench with versatile 1/4-20 mounting hardware and decorative protective bumpers!
These Bumpers are for ~1.5 inch thick material- 2 ¾ inch edge glued boards or 2- ¾ inch pieces of plywood.
The Dimensions of these Corner Brackets are optimal for a 24inchx16inch Worktops. The space between each corner bracket is wide enough for 1 Handler System Wall Mount on each side or 2 Wall mounts on the front or Back.
If you will be attaching these to a smaller worktop they will still fit! But Handler Wall Mounts may not fit between the corner brackets.
Installation:
Cut 1 inch 45 degree chamfers on edge of material
Mark Holes. Pre drill, and install corner bracket with 1 screw per side
The 1/4-20 Threaded inserts are compatible with a growing line of WD accessories- starting with the Corner Anchor Point
Or attach your own accessory with 1-4/20 Hardware
